standards were introduced in the US and Japan, and – with some delay – in Brazil and China. Consequently, the objective is to reduce NOx across the board. And dramatically so. The automobile industry has [...] exception. The specific benefit: Not only are the limit values adhered to, the diesel consumption has declined, as well. Responsibility is best shared. We have made it our challenge to accompany the automobile [...] that, together, we can raise the bar. This has made us the inter- national partner of choice and world market leader. We are rooted in our expertise, the economics and the sense of responsibility for safety

description The connection of VOSS quick connect system 246 AX is made by inserting the plug into the connecting port or the adapter, while paying attention to the assembly instructions. The retaining clip [...] conditions, the system is applicable at an operating pressure up to 20 bar for nominal size 8 and 12 bar for nominal size 12. The system is available with the following sealing materials depending on the medium [...] clip locks behind the flange of the connecting port or the adapter. Then the con- nection is completely assembled and tight. 5. Other Variants, other sizes and line assemblies are available on request

identify the Transmission file, assigned by the sender. S005 Reference/Password of the Recipient C N 0022 Reference or password of the Recipient M an..14 N Not used 0025 Reference or password of the Recipient [...] number of the message type M an..3 M an..3 Specifies the version of the message type. D Draft version/UN/EDIFACT Directory 0054 Release number of the message type M an..3 M an..3 Specification of the version [...] Name of the participant C N 3036 Name of the participant M an..35 N Not used 3036 Name of the participant C an..35 N Not used 3036 Name of the participant C an..35 N Not used 3036 Name of the participant

pressure of the piping system depend on the selected pipe material and wall thickness. Temperature range The temperature range of the VOSSFlareORFS flare coupling system is limited by the fitting material [...] in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. Job Id: 262.1-023823-1 [...] resistant type. The pipe couplings are not approved for application in high pressure fuel injection systems of combustion engines. Selection of materials It shall be noted that the selection of the materials

complying with the approval conditions described on the certificate and/or on the Rules of this Society. 2. This certificate will be invalid from the expiry date aforementioned unless the extension or renewal [...] that the above-mentioned product has been approved in accordance with the relevant requirement of this Society's Rules and / or of the recognized standards as follows. Pt. 5, Ch. 6, Sec. 1 of the Rules [...] invalid. 4. Should the specified rules, regulations or standards be amended during the validity of this certificate, the product is to be re-approved by this Society in accordance with the requirements as

connect system 232 Worldwide, the VOSS quick connect system 232 for pneumatic systems in commercial vehicles guarantees maximum safety and the best solutions, even for the most difficult connections. VOSS [...] and endplates. With the new endplates, brake components can be pre-assembled uniformly based on the manufacturer’s unique production strategy. Manufacturers will always find the right solution with VOSS [...] solutions and find new ones. The vehicles are examined with regard to response times of the brake system, line routing, number of different components, installation space, weight and the possible integration of

complying with the approval conditions described on the certificate and/or on the Rules of this Society. 2. This certificate will be invalid from the expiry date aforementioned unless the extension or renewal [...] that the above-mentioned product has been approved in accordance with the relevant requirement of this Society's Rules and / or of the recognized standards as follows. Pt. 5, Ch. 6, Sec. 1 of the Rules [...] invalid. 4. Should the specified rules, regulations or standards be amended during the validity of this certificate, the product is to be re-approved by this Society in accordance with the requirements as

required. Acceptance conditions The seal material must be resistant to the fluid conveyed in the pipe and also to the surrounding fluid if the coupling is installed inside a tank. The couplings are to be installed [...] systems or otherwise create a hazard to the vessel, equipment or personnel onboard. The acceptance of the a.m. products on board ship classed with RINA is subject to the satisfactory outcome of testing as per [...] accordance with DIN 3859-1 table 2 or higher grades. Fields of application The couplings are acceptable for the systems indicated in the Table 16 and par. 2.4.5 of Part C, Chapter 1, Section 10 of RINA Rules

connection systems for the automotive industry and mechanical engineering. The success of the VOSS Group is based on great customer proximity, committed employees, innovative products and the demand for permanent [...] quality for customers with the highest requirements. With strategic corporate development, a responsible awareness of people, the environment and the region, VOSS has evolved over the past 90 years to an i [...] selection, we are always able to optimize your systems to meet the highest demands. Customers and users benefit from the system expertise of the entire VOSS Group. This includes not only our innovative product

required. Acceptance conditions The seal material must be resistant to the fluid conveyed in the pipe and also to the surrounding fluid if the coupling is installed inside a tank. The couplings are to be installed [...] systems or otherwise create a hazard to the vessel, equipment or personnel onboard. The acceptance of the a.m. products on board ship classed with RINA is subject to the satisfactory outcome of testing as per [...] accordance with DIN 3859-1 table 2 or higher grades. Fields of application The couplings are acceptable for the systems indicated in the Table 16 and par. 2.4.5 of Part C, Chapter 1, Section 10 of RINA Rules

provided by in- serting the plug into the connecting port, while paying attention to the assembly instructions. Pressing down the locking element serves as an additional locking of the connection (see figs [...] possible. The plug is suitable for the connection of hoses. The connection of poly- amide tubes requires a different fir-tree profile. VOSS quick connect system 250 requires a connecting port at the component [...] specification of the connecting port can be provided if required. The connecting port should preferably be made of brass or steel. See figs. 4 and 5 for dimensions. 3. Functional description The function of

equipment, the design, ratings or operating parameters of which have been varied from the specimen tested. The manufacturer should notify Lloyd's Register EMEA of any modification or changes to the equipment [...] caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information [...] exclusively on the terms and conditions set out in that contract. Torsten Schroeder Senior Specialist to Lloyd's Register EMEA A member of the Lloyd's Register group This is to certify that the undernoted

from the specimen tested. The manufacturer should notify Lloyd's Register EMEA of any modification or changes to the equipment in order to obtain a valid Certificate. Previous Version: 15/20087 The Design [...] caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information [...] exclusively on the terms and conditions set out in that contract. Torsten Schroeder Senior Specialist to Lloyd's Register EMEA A member of the Lloyd's Register group This is to certify that the undernoted

used to transmit the total despatched quantity per delivery note line of the item identified in the LIN segment. If several SG17 are used to transmit the total despatch quantity of the item per delivery [...] number M an..14 M an..14 Senders unique message reference (in the interchange). Sequence number of the messages in the interchange. DE 0062 in the UNT will be identical. Sender generated. S009 Message identifier [...] which the goods (cargo) are unloaded from the means of transport having been used for their carriege C517 Location identification C R Information about the place of delivery: Name, address of the place

6h) 600,00 € Optimizing the coupling technology 1.200,00 € On systems and devices with preparation (2-3 persons; min. 1 day) Travel and expenses are added to this based on the distance. These are invoiced [...] invoiced separately and vary due to the travel time and possible overnight stays. Training materials and other materials included in the price. VOSS16014_Flyer_Schulungsangebot_EN_RZ.indd 1-2 30.03.17 16:26 [...] Basics of the coupling product line ■■ Surface technologies ■■ Overview of couplings and VOSS product names ■■ Overview of tube connection systems - Distinguishing features - Selection of the correct system