control system. Subsequently, stress tests were carried out, which showed that the hydrogen does not damage the components and that these are suitable for hydrogen. 16 Test mark certificate – VOSSRingM and [...] installation on site. Check your tubing and hose routing Make sure that your tubing and hoses are routed and installed properly and that supports are evenly spaced. Mechanical arrangements which are too [...] high-performance steel and offer a tool service life that is 20 times longer. We prevent the cone contour from widening with a specially developed material. That does away with the need for regular functionality

trademarks of DNV GL AS. TYPE APPROVAL CERTIFICATE Certificate No: TAP00001T4 This is to certify: That the Pipe Couplings, Flared or Welded Nipple Type with type designation(s) VOSSFlareORFS tube coupling [...] high pressure fuel injection systems of combustion engines. Selection of materials It shall be noted that the selection of the materials considers the applicable service condition with respect to type of [...] perform periodical assessment after two years (+/- 90 days) and after 3.5 years (+/- 90 days) to verify that the conditions for the Type Approval are complied with. Refer to DNVGL-CP-0338, Sec.4. End of certificate

trademarks of DNV GL AS. TYPE APPROVAL CERTIFICATE Certificate No: TAP000027X This is to certify: That the Pipe Couplings, Bite and Compression Type with type designation(s) VOSSRingM - Cutting Ring Couplings [...] code: TA 251 Revision: 2020-02 www.dnvgl.com Page 4 of 5 Selection of materials It shall be noted that the selection of the materials considers the applicable service condition with respect to type of [...] For retention of the Type Approval, a DNV GL Surveyor shall perform periodical assessment to verify that the conditions for the Type Approval are complied with. Refer to the Class Programme DNVGL-CP-0338

Page 1 of 5 TYPE APPROVAL CERTIFICATE Certificate No: TAP00000BU Revision No: 2 This is to certify: That the Pipe Couplings, Bite and Compression Type with type designation(s) VOSSFormSQR and VOSSFormSQRVA [...] for application in sea water systems or unprotected installation on the open deck. It shall be noted that the selection of the materials considers the intended service condition and installation area of the [...] For retention of the Type Approval, a DNV GL Surveyor shall perform periodical assessment to verify that the conditions for the Type Approval are complied with. Refer to the Class Programme DNVGL-CP-0338

Page 1 of 5 TYPE APPROVAL CERTIFICATE Certificate No: TAP00000BU Revision No: 2 This is to certify: That the Pipe Couplings, Bite and Compression Type with type designation(s) VOSSFormSQR and VOSSFormSQRVA [...] for application in sea water systems or unprotected installation on the open deck. It shall be noted that the selection of the materials considers the intended service condition and installation area of the [...] For retention of the Type Approval, a DNV GL Surveyor shall perform periodical assessment to verify that the conditions for the Type Approval are complied with. Refer to the Class Programme DNVGL-CP-0338

studs that are not true to gauge or that are dam- aged in the taper section must be replaced immediately. All specified assembly distances must be adhered to. Otherwise there is a danger that the coupling [...] designed and routed in such a way that they are not under tension in the unassembled state and that all connecting elements can be easily assem- bled. - Always make sure that hydraulic components are clean [...] process, the ZAKO collar ring serves both as a flaring tool and a component that remains in the flared tube. This means that possible pro- cess faults due to worn tools are eliminated. After this, the

Page 1 of 6 TYPE APPROVAL CERTIFICATE Certificate no.: TAP0000167 Revision No: 1 This is to certify: that the Pipe Couplings, Bite and Compression Type with type designation(s) 2SVA, ES-4, ES-4VA issued to [...] Form code: TA 251 Revision: 2023-09 www.dnv.com Page 6 of 6 Selection of materials It shall be noted that the selection of the materials considers the applicable service condition with respect to type of [...] For retention of the Type Approval, a DNV Surveyor shall perform periodical assessment to verify that the conditions for the Type Approval are complied with. Refer to the Class Programme DNV-CP-0338,

Page 1 of 7 TYPE APPROVAL CERTIFICATE Certificate no.: TAP0000168 Revision No: 1 This is to certify: that the Pipe Couplings, Flared or Welded Nipple Type with type designation(s) VOSS BV-10 Flared Couplings [...] Form code: TA 251 Revision: 2023-09 www.dnv.com Page 6 of 7 Selection of materials It shall be noted that the selection of the materials considers the applicable service condition with respect to type of [...] For retention of the Type Approval, a DNV Surveyor shall perform periodical assessment to verify that the conditions for the Type Approval are complied with. Refer to the Class Programme DNV-CP-0338,

PERSONAL DATA VOSS AUTOMOTIVE POLAND SP. Z O.O. 1. Personal data Controller We would like to inform you that the Controller of the personal data of our counterparties, their representatives / employees / co-workers [...] 10. Vested rights You have the right to access your Data, including the right to obtain a copy of that Data, to request its rectification, erasure or restriction of processing, to object to its processing

ns for feed or return lines Use of icons in illustrations: Indicates points described in the text that require special attention. Indicates necessary manual actions and their direction. Indicates processes [...] page 4 of 17 1 . Assembly of feed or return lines Before connecting the quick connect system, ensure that the connection contour, especially the bore, is thoroughly checked. The connection contour must be

trademarks of DNV GL AS. TYPE APPROVAL CERTIFICATE Certificate No: TAP00000NZ This is to certify: That the Pipe Couplings, Flared or Welded Nipple Type with type designation(s) VOSS Welding Couplings with [...] out at production places by DNVGL surveyor. The objective of the periodical assessment is to verify that the design and production conditions for the type approval have not been altered. Main scope of the

trademarks of DNV GL AS. TYPE APPROVAL CERTIFICATE Certificate No: TAP00000R2 This is to certify: That the Pipe Couplings, Flared or Welded Nipple Type with type designation(s) ZAKO Issued to VOSS Fluid [...] out at production places by DNVGL surveyor. The objective of the periodical assessment is to verify that the design and production conditions for the type approval have not been altered. Main scope of the

trademarks of DNV GL AS. TYPE APPROVAL CERTIFICATE Certificate No: TAP00000NZ This is to certify: That the Pipe Couplings, Flared or Welded Nipple Type with type designation(s) VOSS Welding Couplings with [...] out at production places by DNVGL surveyor. The objective of the periodical assessment is to verify that the design and production conditions for the type approval have not been altered. Main scope of the

Page 1 of 4 TYPE APPROVAL CERTIFICATE Certificate No: TAP00002BH Revision No: 1 This is to certify: That the Hose end fittings for non-metallic flexible hoses with type designation(s) VOSSPlug Issued to [...] For retention of the Type Approval, a DNV Surveyor shall perform periodical assessment to verify that the conditions for the Type Approval are complied with. Refer to the Class Programme DNV-CP-0338,

12-Jan-2021 EXPIRY DATE 11-Jan-2026 ABS TECHNICAL OFFICE Hamburg Engineering Department This is to certify that a representative of this Bureau did, at the request of VOSS FLUID GMBH located at LUEDENSCHEIDER STR [...] to be installed in ABS classed vessels or facilities. This certificate, by itself, does not reflect that the product is Type Approved. The scope and limitations of this assessment are detailed on the pages